<!-- Source: https://dunger.ua/en/blog/micronutrient-fertilizers-when-needed; language: en-US -->

![Notebook and soil sample on a table beside vegetable beds in a Ukrainian garden](https://dunger.ua/img/43c700de-3463-5666-8748-bd01fd0a6ec2?width=3840&quality=80&format=webp&withoutEnlargement=true)

[Plant nutrition and soil](https://dunger.ua/en/blog/categories/plant-nutrition-and-soil)

# Micronutrient fertilizers: when to use them and how to read the label

Published

2026-11-18

Updated

2026-11-18

To read

7 min

Find out which nutrient your plants need, then check its form, content and application instructions before choosing a fertilizer.

Choose a micronutrient fertilizer for a specific plant need. The claim on the front of a pack gives you little information about which nutrient a plant lacks, how much is in the product or whether the roots can take it up. If leaves turned pale after several wet days, first check how quickly the soil drains and look at the roots. If testing points to a particular nutrient, look for that element in the composition and match the application instructions to your crop.

The same approach works in a vegetable bed, a greenhouse or a flower border. Conditions can change across a few metres. Treat each growing area on its own evidence before buying something for the entire garden.

## Which nutrients are in a micronutrient fertilizer?

Plants need small quantities of iron, manganese, zinc, copper, boron, molybdenum, chlorine and nickel. Each has a role. Plants need iron to make chlorophyll, for example, while manganese helps in photosynthesis. Nitrogen, phosphorus and potassium are macronutrients. So are calcium, magnesium and sulphur, even if a label lists them alongside trace elements. A fertilizer can supply several micronutrients or just one.

Start with the chemical symbols. Fe stands for iron, Mn for manganese, Zn for zinc, Cu for copper, B for boron and Mo for molybdenum. If the element you need is missing from the composition, the words “with micronutrients” give you no amount to use in a calculation. If it appears, read across the row to see how much the product contains and whether the form is specified.

## Check whether a particular element is needed

Look at several plants of the same crop and a similar age. Note whether the paling began on young or old leaves and where the affected plants are. An edge of a bed, a hollow that holds water and a row with a faulty dripper each suggest different checks. A photo helps you track changes, but leaf colour alone tells you little about the roots, watering or previous inputs. If yellowing is the main symptom, work through the [possible causes of leaf chlorosis](https://dunger.ua/en/blog/plant-leaf-chlorosis) first.

Cool, wet spring soil can limit root activity. In calcareous ground with a high pH, plants can have less access to iron, manganese or zinc even when the soil contains them. A greenhouse and an outdoor bed may have different water sources, input histories and root conditions. For a garden in Ukraine, start by checking the pH where the symptoms appeared and interpreting it for the crop. A healthy patch can provide a comparison if you keep the samples separate.

If the problem persists, ask a laboratory which available forms of nutrients it measures and whether it can interpret the results for your crop. A soil test describes the growing environment. Tissue analysis measures what is in the part of the plant you submit. The plant part, its age and the growth stage matter. Follow the sampling instructions before collecting material, especially if you are comparing affected plants with apparently healthy ones.

Keep a short description with the sample. Note whether water lingers at the roots, whether the potting mix recently changed and whether the plants started paling together.

## Read the chemical form and the nutrient amount separately

The chemical form tells you what compound carries the element. An iron product might contain a sulfate or an iron chelate. In a chelate, an organic molecule binds the metal ion. Fe-EDTA, Fe-DTPA and Fe-EDDHA are different forms you may see on iron products. Their stability changes with pH. Use the conditions specified for the particular product, the measured pH and the approved application method to guide the choice.

If the label gives both a total and a chelated amount of the same element, check how they are related. The chelated amount may be included in the total. Adding both figures then counts part of the element twice. The mass of the compound that carries a nutrient is also different from the mass of the nutrient itself. To compare products, use the same measure, such as elemental zinc content expressed in the same units.

### What to check on a label before buying

- The symbol and content of the element you need, plus its form if specified.

- The crop, growth stage and application method in the full instructions.

- The rate unit and what it refers to, such as area, water volume or plant count.

- Other products that supply the same element to this growing area.

## Tell the nutrient content from the application rate

A percentage by mass tells you how much of the element a given mass of fertilizer contains. Grams per litre of concentrate express content per unit volume of the concentrate itself. To convert a percentage by mass for a liquid into grams per litre, you need the product density. A litre of concentrate may weigh something different from a litre of water. If the label leaves the percentage basis unclear, get that information before comparing it with another product.

The application rate is a separate figure. Grams of product per square metre describe the amount for an area. Millilitres of concentrate per litre of water tell you how to prepare a solution. If the instructions also give a volume of mixed solution per plant, use that figure when calculating what to prepare. Each quantity does a different job. When you change the application method, start the calculation from the relevant line of the instructions.

To plan a purchase for an area-based application, measure the part of the bed that will actually be treated and leave out the paths. If the label specifies a volume of mixed solution for each plant, count the plants you will treat. Work out the amount needed before choosing a pack. The size of the pack has no bearing on the amount to apply to the bed.

## When a blend makes sense and when to wait

A blend with trace elements is an option when the crop needs regular feeding and the whole composition fits the site. If the evidence points to only one element, compare a targeted option with the blend. Consider what else each product supplies and whether it would duplicate earlier inputs. For the specific case of boron, see [how to choose a boron fertilizer](https://dunger.ua/en/blog/boron-fertilizers-when-needed).

List the products already used in that bed. Check the label of any purchased potting mix or starter fertilizer. Amounts expressed in different units need a common basis before they can be added. Pay particular attention to overlapping sources of boron or copper. Too much of a micronutrient can damage plants. Adding several new products also makes it harder to establish the cause if plants decline.

Where waterlogging or uneven watering suggests root stress, address those conditions first. After any justified change, look at the new growth under comparable lighting. Keep a separate note of the date, product and actual amount applied. It gives you a useful record of what changed when you next assess that part of the garden.

## Read a DÜNGER label in practice

### [Complex fertilizer for lavender, granular](https://dunger.ua/en/mineral-fertilizers/small-packaging/for-landscape-design/complex-fertilizer-for-lavender)

DÜNGER mineral granules with NPK(S) 10:8:17(11), copper, boron, iron and succinic acid. For soil feeding of lavender and the crops listed in the instructions. Rate: 30 g/m². Pack sizes: 0.5 and 1 kg. Do not dissolve in water.

This blend lists copper, boron and iron separately in its composition. It is a soil fertilizer for lavender and the other crops specified in the instructions. Read the full application guidance if your planting fits its stated uses and your crop needs this blend. For a different crop, start with that crop's needs and the instructions of a suitable product.

In the [My Garden fertilizer calculator](https://dunger.ua/en/my-garden), you can save separate growing areas, their crops and measurements. Check the parameter needed for the chosen product. If the application method is available in the calculator, use it to work out quantities and pack sizes for the area.

## Frequently asked questions

###

Plants need micronutrients, but the need for supplemental fertilizer depends on the nutrients already available, the crop and local conditions. If the soil or potting mix already meets the need, feeding every year as a precaution can supply too much.

###

###

## Rate this article

No ratings yet. Be the first!

Rate this article

## Discussion(0)

This discussion is shared across all article languages.

Loading…

Share this article

## Related Posts

![Кальцієва селітра. Коли рослинам потрібен нітрат кальцію](https://dunger.ua/img/17a3e0f0-8e99-51dd-8336-87cf2e5be694?width=3840&quality=80&format=webp&withoutEnlargement=true)

[Plant nutrition and soil](https://dunger.ua/en/blog/categories/plant-nutrition-and-soil)

### Calcium nitrate fertilizer and when plants need it

Read the calcium and nitrogen declarations, distinguish feeding from liming and check irrigation when fruit shows blossom-end rot.

2026-11-18

•

7

![Коли вносити азотні добрива: як вибрати час для підживлення](https://dunger.ua/img/4523f679-6e44-5b75-8912-f6c575aca8a2?width=3840&quality=80&format=webp&withoutEnlargement=true)

[Plant nutrition and soil](https://dunger.ua/en/blog/categories/plant-nutrition-and-soil)

### When to apply nitrogen fertilizer: choosing the right time

Choose when to apply nitrogen using crop stage, soil moisture and earlier feeding. See when to wait and how to reassess after rain.

2026-11-18

•

7

![Гноївка як добриво: склад, аналіз і обмеження](https://dunger.ua/img/b7fba261-b789-54f4-8014-2276eb370e91?width=3840&quality=80&format=webp&withoutEnlargement=true)

[Plant nutrition and soil](https://dunger.ua/en/blog/categories/plant-nutrition-and-soil)

### Liquid manure as fertilizer: testing, nutrients and limits

Identify the material, check the batch test and assess the soil, crop and water risks before deciding whether to use liquid manure.

2026-11-18

•

7

Order &amp; Inquiry

## Get in touch

![Dunger](https://dunger.ua/img/27f9aa37-abf2-4992-bc01-06d633e71f25)

Order mineral and organo-mineral fertilizers directly from the manufacturer. We will help you choose the right product for your garden, farm or landscape.

2 hours

response time

Free

product advice

Personal

manager

Easy

to get in touch

Step 1 of 425%

### Hello!

Let's get acquainted and help you

Tell us what you are interested in?

Press Enter to continue

By clicking the button, you agree to [privacy policy](https://dunger.ua/en/privacy)
