<!-- Source: https://dunger.ua/en/blog/clematis-pruning-group-three; language: en-US -->

![Purple clematis on a wooden garden support](https://dunger.ua/img/766808f7-c3a3-50f1-8a38-6ed423dffc58?width=3840&quality=80&format=webp&withoutEnlargement=true)

[Flowers and ornamentals](https://dunger.ua/en/blog/categories/flowers-and-ornamentals)

# Group three clematis: where to prune and how to train new shoots

Published

2026-11-20

Updated

2026-11-20

To read

7 min

Identify group three clematis, find the low healthy buds to cut above and give the new shoots a clear path across their support.

Group three clematis flowers on stems that grow during the current season. Once healthy buds near the base are visible in late winter or early spring, you can cut most of the previous season's long growth back. The new shoots then need a clear route across their support. Identify the group before you make that first cut, particularly if several climbers share the same trellis or your clematis flowered later than usual after a hard winter.

## Check the flowering habit before cutting

Start with the cultivar name on the label or in your planting records, then look up its pruning group. Many group three climbers bloom toward the latter part of summer. However, the calendar tells only part of the story. A group two plant that has lost its older stems in winter may flower only later on new growth. There are also some mid to late season cultivars that adapt to either pruning approach. A reliable cultivar identification is useful before deciding whether to keep some of last year's wood.

When the label is missing, trace a few shoots from base to flower. An early flower on a short side shoot attached to an overwintered stem gives more useful information than flower size or colour. Record what you see at more than one point in the season. If you are still unsure, remove only clearly damaged or dead growth for now and observe the healthy stems. If there are no flowers to trace, use the guide to [why clematis may fail to bloom](https://dunger.ua/en/blog/why-clematis-does-not-flower) to check other possible causes.

## Choose the spring window from the buds and weather

In a Ukrainian garden, buds near a sun-warmed wall can become active before buds on an exposed trellis a few steps away. Look for a period when the healthy buds are visible but shoots have yet to grow long and tangled. With some space at the bottom of the support, it is easier to see which stem you are cutting. Choose a calm working day when the stems are free of ice and the base is accessible.

After snow or a deep mulch of fallen leaves, uncover the stem bases gently before deciding what to remove. If a sharp freeze is expected or you cannot distinguish a live node, leave the main cuts until the plant is easier to inspect. Clearing a broken length of vine from a support in autumn is a separate job. See the guide to [pruning clematis before winter](https://dunger.ua/en/blog/clematis-pruning-before-winter) for that work, then return to the new buds for your main group three cut.

## Follow each established stem to its low healthy buds

- Clear the base so you can see which stem belongs to the clematis. Trace it a short distance upwards. If other climbers are mixed in, mark them individually before touching the secateurs.

- Find the lowest clearly healthy pair of buds on each live old stem. Make a clean cut just above that pair. The right point can be higher on one stem than on its neighbour.

- Divide long tangled stems into manageable lengths and support each piece as you cut it away. Pulling a tangled top hard may take a healthy bud or a neighbouring stem with it.

- Remove obviously dead or broken sections. Leave the surviving buds and a clear line around the lower rungs so young growth has space to climb.

A clear bud pair is a better guide than matching every cut to the same height. If a low pair looks hollow or damaged, inspect the rest of the stem rather than using that node automatically. When you cannot distinguish sound buds, return after the weather has warmed and take another look. If you accidentally knock off a healthy pair on one stem, there is no advantage in shortening the others to match it.

## Give young and crowded plants a separate plan

On a young clematis, your aim is to establish several shoots at the base. A new plant with one long stem may need different attention from a vigorous plant that has already made several strong stems. Check the cultivar guidance and locate a strong pair of buds before you shorten it in its first spring. If the plant is weak because the soil has dried repeatedly or holds water, correct the root conditions. Pruning alone cannot restore a poor growing site.

For a clematis sharing a support with a rose or another clematis, put an identifying tag low beside each plant. Start at the bottom of a stem and follow it to the first crossbar. If the vines are tightly mixed, remove old ties first instead of cutting at a point where they cross. As new growth appears, give one plant a route to the outside and the other one an open way up the centre. Their winter stems will be easier to distinguish next time.

## Spread the new stems as they grow

A clematis grips a suitable support with its leaf stalks. If wooden uprights are too broad for them to curl around, fine crossbars or securely fixed lines give new shoots a way to climb. Guide them across open parts of the support while they are still easy to move. Use a soft tie only as long as needed and leave it loose enough that the stem is not squeezed. After strong wind, look for a tip that has come loose or is rubbing on a hard edge.

Check moisture below the surface after pruning. Ground under a roof overhang can remain dry in rain, while a low corner that receives runoff may stay wet. Water according to the condition around the roots and keep mulch away from the emerging stems. When just one shoot wilts, inspect it for a bend or tight tie and check root-zone moisture before changing the feeding plan. If wilting spreads or the cause is unclear, get it identified before treating it as a nutrient problem.

## Trace the cause of a flowerless lower trellis

Suppose you have a confirmed group three cultivar whose flowers appeared above your head last summer. Old bare stems filled the lower trellis. Prune to sound low buds and clear the first few rungs. Once fresh stems are long enough to guide, direct the outer ones in different directions and give the middle shoots room to climb. If sunlight is cut off by a neighbouring crown, record which parts of the support actually receive light and where buds develop. That observation helps you decide if spacing the shoots made a difference.

An established cultivar on a roomy pergola may suit a light thinning approach, particularly if you want to keep seed heads on appropriate small-flowered forms. On a short trellis with a confirmed group three climber that you want to flower nearer eye level, the regular hard spring cut helps create fresh growth lower down. Observe where the flowers form before changing several things at once. Try one change in the direction of young stems and compare the result over the season.

## Flower feed when growth and soil indicate a need

A healthy clematis can produce new growth after pruning without being fed immediately. Consider light, moisture, earlier applications and leaf development. If the flower bed needs compound root feeding, compare its condition with the instructions for established flowers. Address a damaged stem, inadequate water or persistently wet soil first.

### [Complex fertilizer for vegetables, fruit and berry crops, and flowers](https://dunger.ua/en/mineral-fertilizers/small-packaging/for-garden-crops/29-complex-fertilizer-for-vegetables-fruit-crops-and-flowers)

DÜNGER fertilizer for vegetables, fruit and berry crops, and flowers in a 5 L canister. View the product details, choose the number of canisters and order for your vegetable garden, berry patch or flower beds.

Keep the flower bed with the trellis as a separate zone in [My Garden](https://dunger.ua/en/my-garden). Enter its actual measurements before estimating what you need for a suitable root application.

## Questions about group three clematis

###

Use the healthy bud pair on each stem as your guide. For the standard group three cut on established climbers, this is usually the lowest clearly healthy pair. The points do not have to line up.

###

###

## Rate this article

No ratings yet. Be the first!

Rate this article

## Discussion(0)

This discussion is shared across all article languages.

Loading…

Share this article

## Related Posts

![Чим підживити магнолію: перевірка ґрунту та коренів](https://dunger.ua/img/209db9ed-d503-56e6-8349-5690d1d98dc3?width=3840&quality=80&format=webp&withoutEnlargement=true)

[Flowers and ornamentals](https://dunger.ua/en/blog/categories/flowers-and-ornamentals)

### Feeding magnolia: check the soil and root zone first

Check magnolia drainage, planting depth and soil pH before feeding. Use growth, frost history and soil tests to decide what to do next.

2026-11-19

•

7

![Підживлення ірисів навесні: коли воно потрібне](https://dunger.ua/img/1bfe628c-07aa-5302-8b51-659b7473cfa9?width=3840&quality=80&format=webp&withoutEnlargement=true)

[Flowers and ornamentals](https://dunger.ua/en/blog/categories/flowers-and-ornamentals)

### Spring feeding for bearded irises: when it helps

Check sun, moisture and rhizomes before feeding bearded irises. Learn when the bed needs nutrients and when better drainage or division after bloom will help.

2026-11-19

•

7

![Чим підживити гладіолуси після сходів і перед цвітінням](https://dunger.ua/img/75c14f1f-d9fc-5165-8129-2eebd9f0426b?width=3840&quality=80&format=webp&withoutEnlargement=true)

[Flowers and ornamentals](https://dunger.ua/en/blog/categories/flowers-and-ornamentals)

### Feeding gladioli after emergence and before flowering

Decide when gladioli need feeding after emergence or before flowering. Check growth stage, watering and soil before choosing a fertilizer.

2026-11-18

•

7

Order &amp; Inquiry

## Get in touch

![Dunger](https://dunger.ua/img/27f9aa37-abf2-4992-bc01-06d633e71f25)

Order mineral and organo-mineral fertilizers directly from the manufacturer. We will help you choose the right product for your garden, farm or landscape.

2 hours

response time

Free

product advice

Personal

manager

Easy

to get in touch

Step 1 of 425%

### Hello!

Let's get acquainted and help you

Tell us what you are interested in?

Press Enter to continue

By clicking the button, you agree to [privacy policy](https://dunger.ua/en/privacy)
